📧 info@fouwell.com  ·  📱 +86 133 8591 5251 (WhatsApp)

Siemens 6ES7212-1AE40-0XB0

CPU 1212C DC/DC/DC, 8DI/6DO/2AI, 24VDC, CE/CCC

Where It Goes

Typical Applications

Siemens 6ES7212-1AE40-0XB0 is typically used in the following applications:

Small machine control
Conveyors, packaging lines, mixers, filling machines — replaces relay logic and replaces micro-PLCs in 8–32 I/O class.
Water & pump stations
Pump sequencing, level control, pressure regulation — built-in PID and retentive memory handle unattended operation after power loss.
Building automation
HVAC, lighting, access control — the on-board PROFINET port talks directly to ET 200 remote I/O and HMI without extra modules.
Textile & printing machines
High-speed counting via 4 onboard HSC inputs (up to 100 kHz) — direct connection to encoders without extra counters.
Cross Reference

Compatible & Replacement Part Numbers

If your machine uses an older or different Siemens part number, the table below shows drop-in options. Send your exact part number to info@fouwell.com and we’ll confirm compatibility before shipment.

Original Part NumberCompatibility Note
6ES7212-1AE30-0XB0Direct predecessor — same firmware, same pin-out, drop-in replacement.
6ES7212-1AE31-0XB0Earlier firmware revision — also compatible, same I/O count.
6ES7212-1BE40-0XB0Different firmware signature — check project; can be migrated via TIA Portal.
6ES7212-1HE40-0XB0AC/DC/RLY variant — same CPU, only PSU/relay outputs differ. Verify output type before swap.
Buyer Questions, Engineer Answers

Frequently Asked Questions

What does the order code 6ES7212-1AE40-0XB0 mean?

It is a Siemens SIMATIC S7-1200 CPU 1212C with DC/DC/DC power supply, 8 digital inputs, 6 digital outputs and 2 analog inputs, in 24 VDC — supplied with CE and CCC approvals. Fouwell sources this part from official Siemens channels and ships it worldwide with full traceability.

Is this CPU 1212C compatible with Siemens TIA Portal and STEP 7?

Yes. The 6ES7212-1AE40-0XB0 is fully supported by Siemens TIA Portal V13 SP1 and later, and by STEP 7 Basic in the same line. Programming, hardware configuration and firmware updates all work the same as other S7-1200 CPUs.

How does the CPU 1212C compare with other S7-1200 models (1211C / 1214C / 1215C / 1217C)?

The 1212C sits in the middle of the family: bigger than the 1211C (6DI/4DO/2AI, 30 KB) but smaller than 1214C (14DI/10DO/2AI), 1215C (14DI/10DO/2AI/2AO with 2 PROFINET ports and analog outputs) and 1217C (16DI/16DO with 1 ns bit time). For 8DI/6DO/2AI it gives the best price-per-I/O and leaves expansion room via one SB (signal board) and up to 3 CM (communication) modules.

What are the limits on bit memory, counters, timers and retentive data?

Bit memory (M) is 4 KB; counters, timers and function blocks are limited only by program memory (50 KB). Retentive data is 10 KB of non-volatile memory that survives power loss — enough to hold recipes, counters and operator setpoints without a battery. If your project needs more, move up to the 1214C (75 KB program / 10 KB retentive) or 1215C (100 KB / 10 KB).

What fieldbus and HMI protocols are supported out of the box?

The on-board PROFINET interface supports PROFINET IO (controller and device), S7 communication, TCP/IP, ISO-on-TCP, Modbus TCP (via library) and open user comm. Through the RS485 / CM 1241 add-on you get Modbus RTU master/slave, USS and ASCII. PROFINET also natively drives Siemens HMI (KTP / Comfort / Unified) and third-party HMI via the open Ethernet protocol.

How is the unit shipped and how long does delivery take?

In-stock units ship within 24 hours via DHL, FedEx or UPS with full insurance. Economy air freight to most Asian / Middle East / European destinations arrives in 3–5 working days; sea freight is available for larger orders. Each box ships in original Siemens packaging with an inspection report.

Do you offer a warranty on this Siemens PLC?

Yes. Every Fouwell-supplied Siemens part is 100% genuine, factory-sealed, and backed by a 12-month replacement warranty against manufacturing defects. Warranty does not cover damage from improper installation, lightning, or use outside the official Siemens specifications.

Can you cross-reference an old or hard-to-find S7-1200 part number?

Yes. Send your original Siemens part number (e.g. 6ES7212-1AE30-0XB0 or any S7-1200 / S7-1500 / ET 200 code) to info@fouwell.com and our engineers will reply with current availability, alternatives and a price within one business day — usually within an hour during Asia/Shanghai office hours.

Still have a question? Send it to our engineers →

Verified Buyer Feedback

What Customers Say

Real feedback from Fouwell's verified Alibaba Trade Assurance buyers — not necessarily this exact part, but the same team and sourcing process behind it.

★★★★★

“Nice item and the supplier was quick at addressing my issues”

Verified Buyer — Ghana
★★★★★

“excellent item and delivery was very fast”

Verified Buyer — Ghana
★★★★★

“packing is very good, we found in good condition”

Verified Buyer — India
★★★★★

“Five stars all the way! The service, the product, and the overall experience were outstanding. I will definitely be a repeat customer and will recommend them to everyone I know.”

Verified Buyer — India
★★★★★

“good product. seller response is fast. no doubt to buy in this store”

Verified Buyer — Indonesia
★★★★★

“quick response, communicative seller , safe packing, quick delivery. thank you”

Verified Buyer — Indonesia
★★★★★

“everything a seven star”

Verified Buyer — Israel
★★★★★

“excellent service and quick delivery”

Verified Buyer — Israel
You May Also Need

Related Products

Need a different part number?

We source from 25+ brand channels — including discontinued and hard-to-find components.

Send Part List